The VRBCS300W Wireless Back-up camera includes a 2.5 inch color LCD monitor with four angle viewing switch. The wireless camera bolts right onto the license plate frame, or can be placed elsewhere. The camera draws power from the reverse circuitry of the trucks rear end wiring harness.

The Evolution monitor allows me to monitor the performance of my engine’s vital engine components and output values. The following parameters can be displayed on the main Evolution screen (maximum 4 at one time): • RPM • MPH • Engine Coolant Temp • Cylinder Head Temp • Air Intake Temp • Engine Load % • Mass Air Flow • Spark Advance • Battery Voltage • Instantaneous Miles Per Gallon • Fuel Economy • Diagnostic Trouble Codes

All-weather vinyl floor mats feature deep grooves and raised edges to catch and hold snow, slush and mud, while protecting the vehicle carpeting.

It was time for new tires. The original tires lasted five years and 30,000 miles. I hope these do even better.

Part number 9005 from Sylvania. This fog light bulb upgrade provides the brightest and whitest performance available without going to full HID lighting. Cost $45 from Shuck's Auto Supply.

Part number 9007 from Sylvania. This headlight bulb upgrade provides the brightest and whitest performance available without going to full HID lighting.

This sticker came from TEN along with a letter stating that Ford Truck World magazine was being discontinued.

Red & White LEDs work with turn signals, brake lights, and reverse lights. Self adhesive pads mount the light bar beneath the tailgate. I bought and hard-wired an additional 4-pin trailer connection to power it. The reverse light circuit was solder/spliced into the reverse lights. I finished it up with liquid electrical insulation, electrical tape, and plastic wire looms. $119.45 plus shipping and handling from www.stylinconcepts.com. .

Cheap, but it looks better than the hole it covers.

Figuring out how to connect the wiring for these was a pain, but I sure like them. I consider them a safety upgrade. The internal heaters clear the mirrors in less than a minute.

It holds two eight inch Cerwin Vega subwoofers and is powered by an MTX Road Thunder RT202 amplifier.

These came to me free from FTW member firezapper. Thanks Ed!

Included the 561R control module and two 3-button transmitter key fobs with keyless entry. Professionally installed by Car Toys for $432.56. It sure is nice to go out to a warm truck on a cold day.

Very simple bolt up installation. Just be sure to use the short screws. The long screws will bore right through the light. Don't ask me how I know this.

Gate Gasket seals the rear of your truck's bed from dust, dirt, snow, water, and exhaust fumes. Cost is minimal, and installation is very easy. See my gallery for pictures.

Installation was easy. Cost was $949.00 plus shipping. See my gallery for pictures and how to's.

My new BedRug cost $366.46, including tax and installation.

Silblade silicone wiper blades come in several colors, but I chose the blue blades in a black frame.

Easy bolt-up installation. All the pre-threaded holes were already there! Had them painted to match the truck (Not available from factory in True Blue paint code L2). Cost a bit more, but it was worth it. Sure makes getting in and out easier for me and the family. Total cost was $368.57.

Both front and rear

Special order shipped from Australia, of all places! Simple installation, uses already existing holes, no drilling. I get more comments about this Bug Shield than anything else about the truck. Cost $146.39 total, but it was worth it to me. I love the USA.