July 22, 2011OK, So i bought some manuel replacment Side View mirrors to replace my power mirrors because I got a hell of a deal and I never use my power mirrors anyways cause the motors are bad. Anyways After I disconnected mirror cable from the harness my power locks don`t work due to fuses keep being blown. Any idea why? Im not an electrician but do I need to cap that harness off where i removed the cable from or something?
Forums : General Discussions : Power Mirror question. 97 F150 (838 Views)
Subscribers : mercurdeez
July 22, 2011Thermo... Where are you??
July 22, 2011Merc, I would first try putting some tape over the end of the plug that you disconnected to see if that helps you out. But, I have a feeling that you had to tug on one of the wire bundles pretty good and what you managed to do as to cut the insulation on the door lock wiring somewhere near the door hinge. But, this is just a guess.
As I recall, the power mirrors and power locks are on 2 different fuses. so, the two should not be related. Hence why I think you managed to tug on the wiring harness pretty good.
Chris "Thermo" Coleman, Nukie the radioactive 97 Ford X, and K`Re Ann the 03 Jag X